INCONEL 600 (UNS N06600 /W.Nr. 2.4816)
Intshayelelo yeMveliso
I-Alloy 600 ilungele ukusetyenziswa kwiindawo ezininzi ezinobushushu obuphezulu kakhulu kunye neendawo ezine-corrosive kakhulu. I-Alloy 600 yi-alloy ye-nickel-chromium eyenzelwe ukusetyenziswa ukusuka kwi-cryogenic ukuya kwiqondo lobushushu eliphezulu eliphakathi kwe-2000°F (1093°C).
Umxholo ophezulu we-nickel kwi-alloy uvumela ukuba ihlale ikhuselekile ngenxa yemixube emininzi yendalo kunye ne-inorganic.
Ulwakhiwo oluhle lweenkozo zetyhubhu ebandayo egqityiweyo, ukongeza, luzisa ukumelana okungcono kokugqwala, okubandakanya ukudinwa okuphezulu kunye namaxabiso amandla empembelelo.
I-Alloy 600 ayihlaselwa kakhulu ziingxubevange zetyuwa ezingathathi cala nezine-alkaline kwaye isetyenziswa kwezinye iindawo ezinobungozi. I-alloy iyamelana nomphunga kunye nemixube yomphunga, umoya kunye ne-carbon dioxide.
Izicelo:
Izityalo zamandla enyukliya.
Izitshintshi zobushushu.
Iishelufu zeThermocouple.
Izixhobo zokulungisa iikhemikhali kunye nokutya.
Iityhubhu zokuqhekeka ze-ethylene dichloride (EDC).
Ukuguqulwa kwe-uranium dioxide ibe yi-tetrafluoride xa idibene ne-hydrofluoric acid.
Ukuveliswa kwee-alkali ezibangela ukonakala ngakumbi xa kukho iikhompawundi zesalfure.
Iinqanawa ze-reactor kunye neetyhubhu ze-heat exchanger ezisetyenziswa ekuveliseni i-vinyl chloride.
Izixhobo zokucubungula ezisetyenziswa ekuveliseni iihydrocarbons ezinekhlorini kunye ne-fluorine.
Kwi-reactors zenyukliya, kusetyenziswa izinto ezifana neetyhubhu ze-control rod inlet stub, izinto ze-reactor vessel kunye ne-seals, i-steam dryers kunye ne-d separators kwi-reactors zamanzi abilayo. Kwi-reactors zamanzi ezixinzelelweyo, isetyenziselwa iityhubhu zesikhokelo se-control rod kunye neeplates ze-steam generator baffle njl.njl.
Izitywino ze-furnace retort, iifeni kunye nezixhobo.
Iziko leeroli kunye neetyhubhu ezikhazimlayo, ngakumbi kwiinkqubo ze-carbon nitriding.
Isicelo
Ulwakhiwo oluhle lweenkozo zetyhubhu ebandayo egqityiweyo, ukongeza, luzisa ukumelana okungcono kokugqwala, okubandakanya ukudinwa okuphezulu kunye namaxabiso amandla empembelelo.
I-Alloy 600 ayihlaselwa kakhulu ziingxubevange zetyuwa ezingathathi cala nezine-alkaline kwaye isetyenziswa kwezinye iindawo ezinobungozi. I-alloy iyamelana nomphunga kunye nemixube yomphunga, umoya kunye ne-carbon dioxide.
Iinkcukacha zeMveliso
I-ASTM B163, i-ASTM B167
Iimfuno zeKhemikhali
I-Alloy 600 (UNS N06600)
Ulwakhiwo %
| Ni I-Nickel | Cu Ithusi | Fe i-lron | Mn IManganese | C Ikhabhoni | Si I-silicon | S Isalfure | Cr I-Chromium |
| 72.0 min | Ubuninzi obuyi-0.50 | 6.00-10.00 | Ubuninzi be-1.00 | Ubuninzi obuyi-0.15 | Ubuninzi obuyi-0.50 | Ubuninzi be-0.015 | 14.0-17.0 |
| Iipropati zoomatshini | |
| Unikeze Amandla | 35 Ksi min |
| Tensile strength | imizuzu engama-80 yeKsi |
| Ukwandiswa (2" imizuzu) | 30% |
Ukunyamezela Ubungakanani
| I-OD | I-OD Toleracne | Ukunyamezelana kwe-WT |
| Intshi | mm | % |
| 1/8" | +0.08/-0 | +/-10 |
| 1/4" | +/-0.10 | +/-10 |
| Ukuya kuthi ga kwi 1/2" | +/-0.13 | +/-15 |
| 1/2" ukuya kwi-1-1/2", ngaphandle | +/-0.13 | +/-10 |
| 1-1/2" ukuya kwi-3-1/2", ngaphandle | +/-0.25 | +/-10 |
| Qaphela: Ukunyamezelana kunokuxoxiswana ngako ngokweemfuno ezithile zomthengi. | ||
| Uxinzelelo oluvumelekileyo oluphezulu (iyunithi: BAR) | ||||||||
| Ubukhulu bodonga (mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| OD(mm) | 6.35 | 451 | 656 | 898 | 1161 | |||
| 9.53 | 290 | 416 | 573 | 754 | 1013 | |||
| 12.7 | 214 | 304 | 415 | 546 | 742 | |||
| 19.05 | 198 | 267 | 349 | 470 | ||||
| 25.4 | 147 | 197 | 256 | 343 | 509 | 630 | ||
| 31.8 | 116 | 156 | 202 | 269 | 396 | 488 | ||
| 38.1 | 129 | 167 | 222 | 325 | 399 | |||
| 50.8 | 96 | 124 | 164 | 239 | 292 | |||
Isatifikethi soHlonipho
Umgangatho we-ISO9001/2015
Umgangatho we-ISO 45001/2018
Isatifikethi se-PED
Isatifikethi sovavanyo lokuhambelana kwe-TUV Hydrogen
| Hayi. | Ubungakanani(mm) | |
| I-OD | Thk | |
| Ityhubhu ye-BA Uburhabaxa bomphezulu wangaphakathi Ra0.35 | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2” | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4” | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| Ityhubhu ye-BA Uburhabaxa bomphezulu wangaphakathi Ra0.6 | ||
| 1/8″ | 3.175 | 0.71 |
| 1/4″ | 6.35 | 0.89 |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8″ | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4″ | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4″ | 31.75 | 1.65 |
| 1-1/2″ | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| Ityhubhu ye-BA, Akukho sicelo malunga noburhabaxa bomphezulu wangaphakathi | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |