INCONEL 625 (UNS N06625 / W.Nr.2.4856)
Intshayelelo yeMveliso
I-Inconel 625 yenziwe ngokuyintloko yi-nickel (58%), i-chromium (20-23%), i-molybdenum (8-10%), i-manganese (5%), kunye ne-iron (3-5%). Ikwanazo nezixa ezincinci ze-titanium, i-aluminium, i-cobalt, i-sulfur, kunye ne-phosphorus. Olu dibaniso lwezinto luyenza imelane ne-oxidation kunye nokugqwala kumaqondo obushushu aphezulu.
I-Alloy 625 yi-alloy ye-nickel-chromium esetyenziselwa amandla ayo aphezulu, ukuthungwa kwayo okugqwesileyo kunye nokumelana nokugqwala okubalaseleyo. Amaqondo obushushu enkonzo anokuhluka ukusuka kwi-cryogenic ukuya kwi-980°C (1800°F). Amandla e-Alloy 625 afunyanwa kwisiphumo sokuqinisa isisombululo esiqinileyo se-molybdenium kunye ne-niobium kwi-matrix yayo ye-nickel-chromium.
Ngoko ke unyango lokuqinisa imvula alufuneki. Olu dibaniso lwezinto lukwanoxanduva lokumelana okuphezulu kwiindawo ezahlukeneyo zokubola ezinobunzima obungaqhelekanga kunye neziphumo zobushushu obuphezulu ezifana ne-oxidation kunye ne-carburization.
I-Inconel alloy 625 yi-alloy ethandwa kakhulu ngenxa yeempawu zayo ezimangalisayo zoomatshini. Inamandla okudinwa, amandla okutsalwa, kunye nenqanaba eliphezulu lokuqhekeka kokuqhekeka phantsi kobushushu obufikelela kwi-1500F. Ngaphezu koko, ukumelana kwayo nokuqhekeka koxinzelelo kunye nokumelana ne-oxidation kuyenza ifaneleke kwiindlela ezininzi ezigqithisileyo. I-UNS N06625 ikwabonelela ngokuwelda okuphezulu kunye nokukwazi ukwakheka xa kuthelekiswa nezinye izinto ezininzi ezifanayo - nto leyo eyenza ukuba ibe lukhetho olufanelekileyo kwiindawo ezifuna ukwakheka nzulu okanye zidityaniswe nzima. Lilonke, i-Inconel 625 sisisombululo esomeleleyo nesiguquguqukayo kwihlabathi lokhuphiswano lwee-alloys zesinyithi.
Indlela yokuziphatha kunye nokwakheka kweekhemikhali zale nqanaba kwenza ukuba ifaneleke kakuhle kwizicelo zenyukliya kunye neenqwelo-moya.
Isicelo
Indlela yokuziphatha kunye nokwakheka kweekhemikhali zale nqanaba kwenza ukuba ifaneleke kakuhle kwizicelo zenyukliya kunye neenqwelo-moya.
Iinkcukacha zeMveliso
I-ASTM B444
Iimfuno zeKhemikhali
I-Alloy 625 (UNS N06625)
Ulwakhiwo %
| C Ikhabhoni | Mn IManganese | Si I-silicon | P I-phosphorus | Cr I-Chromium | Nb+Ta I-Niobium-Tantalum | Co I-Cobalt | Mo I-Molybdenum | Fe i-lron | Al I-aluminiyam | Ti I-Titanium | Ni I-Nickel |
| Ubuninzi be-0.10 | Ubuninzi obuyi-0.50 | Ubuninzi obuyi-0.50 | Ubuninzi be-0.015 | 20.0-23.0 | 3.15-4.15 | Ubuninzi be-1.0 | 8.0-10.0 | Ubuninzi be-5.0 | Ubuninzi obuyi-0.40 | Ubuninzi obuyi-0.40 | 58.0 imizuzu |
| Iipropati zoomatshini | |
| Unikeze Amandla | imizuzu engama-60 yeKsi |
| Tensile strength | 120 Ksi min |
| Ukwandiswa (2" imizuzu) | 30% |
Ukunyamezela Ubungakanani
| I-OD | I-OD Toleracne | Ukunyamezelana kwe-WT |
| Intshi | mm | % |
| 1/8" | +0.08/-0 | +/-10 |
| 1/4" | +/-0.10 | +/-10 |
| Ukuya kuthi ga kwi 1/2" | +/-0.13 | +/-15 |
| 1/2" ukuya kwi-1-1/2", ngaphandle | +/-0.13 | +/-10 |
| 1-1/2" ukuya kwi-3-1/2", ngaphandle | +/-0.25 | +/-10 |
| Qaphela: Ukunyamezelana kunokuxoxiswana ngako ngokweemfuno ezithile zomthengi. | ||
| Uxinzelelo oluvumelekileyo oluphezulu (iyunithi: BAR) | ||||||||
| Ubukhulu bodonga (mm) | ||||||||
| 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.96 | 4.78 | ||
| OD(mm) | 6.35 | 774 | 1125 | 1540 | ||||
| 9.53 | 497 | 713 | 982 | 1293 | ||||
| 12.7 | 366 | 521 | 712 | 937 | 1271 | |||
| 19.05 | 339 | 459 | 597 | 806 | ||||
| 25.4 | 251 | 338 | 439 | 588 | 872 | 1080 | ||
| 31.8 | 268 | 346 | 461 | 679 | 837 | |||
| 38.1 | 222 | 286 | 381 | 558 | 685 | |||
| 50.8 | 165 | 213 | 282 | 410 | 501 | |||
Isatifikethi soHlonipho
Umgangatho we-ISO9001/2015
Umgangatho we-ISO 45001/2018
Isatifikethi se-PED
Isatifikethi sovavanyo lokuhambelana kwe-TUV Hydrogen
| Hayi. | Ubungakanani(mm) | |
| I-OD | Thk | |
| Ityhubhu ye-BA Uburhabaxa bomphezulu wangaphakathi Ra0.35 | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.00 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 1/2” | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 3/4” | 19.05 | 1.65 |
| 1 | 25.40 | 1.65 |
| Ityhubhu ye-BA Uburhabaxa bomphezulu wangaphakathi Ra0.6 | ||
| 1/8″ | 3.175 | 0.71 |
| 1/4″ | 6.35 | 0.89 |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.00 | |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 9.53 | 3.18 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.00 | |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 5/8″ | 15.88 | 1.24 |
| 15.88 | 1.65 | |
| 3/4″ | 19.05 | 1.24 |
| 19.05 | 1.65 | |
| 19.05 | 2.11 | |
| 1″ | 25.40 | 1.24 |
| 25.40 | 1.65 | |
| 25.40 | 2.11 | |
| 1-1/4″ | 31.75 | 1.65 |
| 1-1/2″ | 38.10 | 1.65 |
| 2″ | 50.80 | 1.65 |
| 10A | 17.30 | 1.20 |
| 15A | 21.70 | 1.65 |
| 20A | 27.20 | 1.65 |
| 25A | 34.00 | 1.65 |
| 32A | 42.70 | 1.65 |
| 40A | 48.60 | 1.65 |
| 50A | 60.50 | 1.65 |
| 8.00 | 1.00 | |
| 8.00 | 1.50 | |
| 10.00 | 1.00 | |
| 10.00 | 1.50 | |
| 10.00 | 2.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |
| 12.00 | 2.00 | |
| 14.00 | 1.00 | |
| 14.00 | 1.50 | |
| 14.00 | 2.00 | |
| 15.00 | 1.00 | |
| 15.00 | 1.50 | |
| 15.00 | 2.00 | |
| 16.00 | 1.00 | |
| 16.00 | 1.50 | |
| 16.00 | 2.00 | |
| 18.00 | 1.00 | |
| 18.00 | 1.50 | |
| 18.00 | 2.00 | |
| 19.00 | 1.50 | |
| 19.00 | 2.00 | |
| 20.00 | 1.50 | |
| 20.00 | 2.00 | |
| 22.00 | 1.50 | |
| 22.00 | 2.00 | |
| 25.00 | 2.00 | |
| 28.00 | 1.50 | |
| Ityhubhu ye-BA, Akukho sicelo malunga noburhabaxa bomphezulu wangaphakathi | ||
| 1/4″ | 6.35 | 0.89 |
| 6.35 | 1.24 | |
| 6.35 | 1.65 | |
| 3/8″ | 9.53 | 0.89 |
| 9.53 | 1.24 | |
| 9.53 | 1.65 | |
| 9.53 | 2.11 | |
| 1/2″ | 12.70 | 0.89 |
| 12.70 | 1.24 | |
| 12.70 | 1.65 | |
| 12.70 | 2.11 | |
| 6.00 | 1.00 | |
| 8.00 | 1.00 | |
| 10.00 | 1.00 | |
| 12.00 | 1.00 | |
| 12.00 | 1.50 | |